Technician T6C: Reading schematics

These are the 12 official questions in group T6C of the 2026–2030 Technician question pool, with the correct answer marked and a plain-English explanation of why it's right. The real exam asks one question from this group.

Learn T6C step by stepThe Technician course teaches this group in a short guided lesson, then drills you on the questions you miss. Start with the free lessons to see how it works.
  1. T6C01Question 1

    What is an electrical diagram using standard component symbols called?

    • AConnection chart
    • BInstrumentation system
    • CSchematic Correct
    • DFlow chart

    Why: A diagram drawn with standard component symbols is a schematic.

  2. T6C02Question 2

    What is component 1 in figure T-1?

    Figure T-1 for question T6C02
    • AResistor Correct
    • BTransistor
    • CBattery
    • DConnector

    Why: Component 1 in T-1 is the zig-zag resistor symbol.

  3. T6C03Question 3

    What is component 2 in figure T-1?

    Figure T-1 for question T6C03
    • AResistor
    • BTransistor Correct
    • CIndicator lamp
    • DConnector

    Why: Component 2 in T-1 is a transistor: a circle with three leads.

  4. T6C04Question 4

    What is component 3 in figure T-1?

    Figure T-1 for question T6C04
    • AResistor
    • BTransistor
    • CLamp Correct
    • DGround symbol

    Why: Component 3 in T-1 is a lamp: a circle with an X.

  5. T6C05Question 5

    What is component 4 in figure T-1?

    Figure T-1 for question T6C05
    • AResistor
    • BTransistor
    • CGround symbol
    • DBattery Correct

    Why: Component 4 in T-1 is a battery: long and short parallel lines.

  6. T6C06Question 6

    What is component 6 in figure T-2?

    Figure T-2 for question T6C06
    • AResistor
    • BCapacitor Correct
    • CRegulator IC
    • DTransistor

    Why: Component 6 in T-2 is a capacitor: two parallel plates.

  7. T6C07Question 7

    What is component 8 in figure T-2?

    Figure T-2 for question T6C07
    • AResistor
    • BInductor
    • CRegulator IC
    • DLight emitting diode Correct

    Why: Component 8 in T-2 is an LED: a diode symbol with arrows pointing out.

  8. T6C08Question 8

    What is component 9 in figure T-2?

    Figure T-2 for question T6C08
    • AVariable capacitor
    • BVariable inductor
    • CVariable resistor Correct
    • DVariable transformer

    Why: Component 9 in T-2 is a variable resistor: a resistor with an arrow.

  9. T6C09Question 9

    What is component 4 in figure T-2?

    Figure T-2 for question T6C09
    • AVariable inductor
    • BDouble-pole switch
    • CPotentiometer
    • DTransformer Correct

    Why: Component 4 in T-2 is a transformer: two coils side by side.

  10. T6C10Question 10

    What is component 3 in figure T-3?

    Figure T-3 for question T6C10
    • AConnector
    • BMeter
    • CVariable capacitor
    • DVariable inductor Correct

    Why: Component 3 in T-3 is a variable inductor: a coil with an arrow.

  11. T6C11Question 11

    What is component 4 in figure T-3?

    Figure T-3 for question T6C11
    • AAntenna Correct
    • BTransmitter
    • CDummy load
    • DGround

    Why: Component 4 in T-3 is an antenna.

  12. T6C12Question 12

    Which of the following is accurately represented in electrical schematics?

    • AWire lengths
    • BPhysical appearance of components
    • CComponent connections Correct
    • DAll these choices are correct

    Why: Schematics show how components are connected, not their physical size or layout.

Learn T6C step by stepThe Technician course teaches this group in a short guided lesson, then drills you on the questions you miss. Start with the free lessons to see how it works.
T6BT6D